MAKE multiple remotes functions Into a single remote!! Duplicate any remotes!! Super convenient!! Cars, sunroofs, garage doors, rolling gates, heating systems, wireless anti-theft devices, home automation...
Super Safety & Secured!! This duplicator adopts one-to-one key copy technology and the password of each key is saved individually!! No possibility to mess up!!
Make a copy of any key in a few seconds through simple steps and be prepared for any possible button breaks!!
★★★[DUPLICATION OF ANY REMOTES]
Duplicate existing remote controllers for cars, car sunroofs, garage doors, gate doors, heating systems, home automation e.g. lighting and etc.
★★★[ABCD FOUR BUTTONS]
Super Convenient!! 1 remote = 4 remotes!! Respectively copy four different types of chips and so operate four different types of facilities!! FOUR storage site for 4 different remotes!!
★★★[ FIXED FREQUENCY]
Works for 315 / 433MHz fixed codes and learning codes; transmit distance is 50-100m (open space)
★★★[Super Secured & Safe to use]
This duplicator adopts one-to-one key copy technology and the password of each key is saved individually!! No possibility to mess up!! Password of each key is saved individually and is reliable!!
★★★[ PORTABLE HUMANIZED DESIGN]
Handy key chain size attached to your car keys. Button slide cover to protect buttons from accidental unplanned operation!!
TO CLEAR CODE:
- Press button A&B at the same time, in about 2 seconds the LED light will flash 3 times and then go out.
- Release button B at the same time, the button A continues to hold, don't release.
- Press button B for 3 times, then you can see the LED light will flash rapidly and continuously (button A is still holding) which indicates that the code has been cleaned up.
- Release the button A and now you have successfully cleared the code.
- Take the original remote control in one hand and Clone Remote Control on the other. Keep the two remote controls as close as possible.
- Press the first keys of the two remote controls altogether and you should see the LED light will flash 2 times and then slowly flash 3 times.
- You have now successfully cloned that button now uses the same method to copy the rest of the keys.
- Product Material: ABS
- Product Size: 55 x 30 x 15mm/2.17 x 1.18 x 0.59"
- Rated Voltage: 6V
- Rated Current: 12mA
- Product Weight: 25g
- Frequency: 315MHz/433MHz
- Modulation Method: ASK (amplitude modulation)
Wireless Distance: 50-100m (open)
- 1 X Remote Control Duplicator (ALL REMOTE)